Home  |  About Us  |  News  |  Tech Support  |  Distributors  |  Contact Us   
 
Products
   

search our products
   

Chalmlite™ Software
   

A Division of Hubbell Ltd
 
Floodlight Servicing
Evolution   




Access to control gear and relamping effected by use of single retained socket head cap screw






The lamp enclosure is easily removed by disconnecting the lamp supply cables and rotating the housing to disengaging from the locating spigots




View shows the complete access afforded by opening the gear cover. The mains terminal block and voltage tappings can be clearly seen and are readily accessible





The lamp housing can then be withdrawn to allow removal and/or inspection of the flamepath. With this done the lamp housing can be inserted back into the enclosure and located on the spigots and the cables connected. The whole operation from start to finish takes less than 3 minutes
 
    


Evolution Junior
Access to control gear and relamping effected by use of single retained socket head cap screw
View shows the complete access afforded by opening the gear cover. The mains terminal block can be clearly seen and is readily accessible
    
The lamp enclosure is easily removed by disconnecting the lamp supply cables and rotating the housing to disengaging from the locating spigots
The lamp housing can then be withdrawn to allow removal and/or inspection of the flamepath. With this done the lamp housing can be inserted back into the enclosure and located on the spigots and the cables connected. The whole operation from start to finish takes less than 3 minutes
 

 

 


A Division of Hubbell Ltd   |   Privacy Policy   |   Terms of Use