Accept Cookies

This site uses cookies. You can read how we use cookies in our privacy policy.
If you do not wish to allow cookies, please close your browser.

 
  Products
 

  search our products
 

  Chalmlite® Software
 

   
  A Division of Hubbell Ltd
 
Now Displaying :
Bulkhead > Zone 1 > NexLED Emergency LED Bulkhead

[Permalink for this page]

NexLED Emergency LED Bulkhead
Currently viewing: NexLED Emergency LED Bulkhead from Chalmit Lighting
Product ID: 00044


Additional images for this item...
Hover over thumbnails to view larger images.
CLICK on the thumbnails for enlargements.
Use your cursor left/right keys to cycle between images.
NexLED Emergency LED Bulkhead
Currently viewing: NexLED Emergency LED Bulkhead from Chalmit Lighting
Product ID: 00044
NexLED Emergency LED Bulkhead
Currently viewing: NexLED Emergency LED Bulkhead from Chalmit Lighting
Product ID: 00044

  NexLED Emergency LED Bulkhead
The NexLED bulkhead luminaire utilises high output 1 Watt light emitting diodes (LED's) that provide a white, instant light that is highly visible.
 
Bulkheads offer a compact and versatile solution for many applications, especially in exposed conditions with high levels of dust and moisture. The enclosure is corrosion resistant marine grade aluminium with a toughened glass cover, silicone rubber sealing gasket and stainless steel fixings. The product can be fitted with either two or eight low power LED's making the NexLED an efficient luminaire for both mains and emergency mode operation from the backup battery. The use of LED technology means that light output in emergency mode is identical to mains operation, lamps switch off for one second when the mains fail then restart to indicate battery operation.
 
The bulkhead is simple to install, easy to maintain and durable. The LED's are more efficient than incandescent and most tungsten halogen lights and operate for up to 80000 hours eliminating relamping in many applications. This new lamp technology emits no heat forward, no ultra violet light, is mercury free and is not susceptible to vibration. Suitable for a wide range of ambient temperatures from -45°C to +55°C  with light output unaffected by low temperatures. Where emergency lighting is required in ambient temperatures below -5°C the NexLED is available with a heated battery compartment which maintains the batteries at the required temperature to sustain emergency duration.
 
  • ATEX Certified
  • GOST Approved
  • IECEx Compliant

PDF Downloads
The following PDFs are available to download:

Filename: NexledZone1English.pdf
NexLED Emergency Datasheet (English)
 Click here to download the PDF (346.89kb)



Product Specifications
The following table lists all technical details associated with this particular item...

Type of Protection     Ex e ib mb (Increased Safety, Intrinsically Safe, Encapsulated)
Area Classification     Zone 1 and Zone 21 areas
ATEX Classification     Group II Category 2 GD
IECEx     IECEx BAS09.0062
ATEX     EC Type Examination Certificate Baseefa04ATEX0245
Coding     Ex II 2 GD Ex e ib mb IIC T4
Enclosure     LM6 aluminium, RAL-9005 black matt fine textured epoxy paint finish
with toughened glass and silicone gasket
Reflector/Geartray     Brushed Aluminium
Entry     2 x M20 Cable Entries
Termination     4 core 4mm˛ max conductor with looping
Installation     Surface Mounted
Lamp Type     2 x 1W LEDs - Colour: White
8 x 1W LEDs - Colour: White
Control Gear     Electronic
Relamping     Not required, maintenance free
Burning Position     Universal
Ingress Protection     IP66/67 to EN 60529
Electrical Supply     110V-254V AC/DC
Battery     Ni-Cd (6V)
Duration     2W version - 3 hours
8W version - 90 minutes
Emergency Output     100%

ATEX Certifications
This type of certification is a European Union requirement for all electrical equipment to be used in potentially explosive atmospheres. The ATEX EC-Type Examination Certificate is issued against the Essential Health and Safety Requirements (EHSRs) given in Annex II of the ATEX directive.

These are classified into ATEX Category 3 and ATEX Category 2 products.

Filename: C-NELE-02--CERTATEXExeNEXLED-Baseefa04ATEX0245.pdf
ATEX Certificate for the NexLED Emergency
 Click here to download the PDF (1.24mb)



IECEx Certifications
The IECEx scheme is an international certification based on the use of IEC standards. The aim of IECEx is to facilitate international trade by providing one certificate, regardless of origin to show that explosion proof equipment is safe for use.

Filename: Nexled_IECExBAS09.0062_.pdf
IECEx Certificate for the NexLED Emergency
 Click here to download the PDF (660.27kb)



GOST Certifications
CHANGE TO EITHER GOST-R OR GOST-K

Filename: CERT_GOSTRCHALMITCOMBINATIONPOCC-GB.Tb05.B03296.pdf
GOST-R Certificate for the Chalmit range. This covers the NexLED
 Click here to download the PDF (1.76mb)


Filename: GOSTK.pdf
GOST-K Certificate for the Chalmit range. This covers the NexLED
 Click here to download the PDF (1.31mb)

ATEX Downloads

Filename: I-NELE-03.pdf
ATEX Installation instruction for the Nexled Em (Russian)
 Click here to download the PDF (489.05kb)


Filename: I-NELE-02.pdf
ATEX Installation instruction for the Nexled Em (English)
 Click here to download the PDF (398.39kb)



IEC Ex Downloads

Filename: I-NELE-03.pdf
IECEx Installation instruction for the Nexled Em (Russian)
 Click here to download the PDF (489.05kb)


Filename: I-NELE-02.pdf
IECEx Installation instruction for the Nexled Em (English)
 Click here to download the PDF (398.39kb)



GOST Downloads

Filename: I-NELE-12.pdf
GOST Installation instruction for the Nexled Em (Russian)
 Click here to download the PDF (428.27kb)



IES Files
From this page you can download electronic IES photometric data for our luminaires to facilitate lighting design in current lighting design software. These files are provided in accordance with the ANSI approved ‘IESNA Standard File Format for the Electronic Transfer of Photometric Data’ and is presented in an ASCII format.

If a particular IES file is not visible, please contact our lighting design team, designsupport@harshandhazardous.com

 Click here to download the IES files in ZIP format (7.46kb)

PDF Downloads
The following PDFs are available to download:

Filename: TechSupport_.pdf
Please contact our Tecnnical Support Team for updated dimensional drawings
 Click here to download the PDF (0.00kb)