| Type of Protection | Ex e mb q (Increased safety Encapsulation Powder filling)
T4 -20ºC to +50ºC
Ta 95ºC DJP A21 -20ºC to +55ºC |
| Area Classification | Zone 1 and Zone 21 |
| ATEX Classification | Group II Category 2 GD |
| IECEx | IECEx ITS 03.0006 |
| ATEX | EC Type Examination Certificate Baseefa04ATEX0286 |
| Enclosure | White polyester painted zinc coated steel body and frame.
Silicone rubber gasket. Clear polycarbonate diffuser |
| Reflector/Geartray | White polyester painted zinc coated steel |
| Entry | 3 x 20mm holes, two at one end and two at the other end |
| Termination | Quick release terminals - 3 core 4mm² max. conductor with looping
and through wiring facility (4 core on emergency)
6mm² terminations available, contact sales |
| Installation | Fixed side brackets with swing out arms, with provision for drop rod mounting |
| Lampholder | G13 (Bi pin) |
| Lamp Type | T8 tubular fluorescent |
| Control Gear | High Frequency (EOL) |
| Relamping | Via front cover, secured by pan head slotted screws |
| Burning Position | Horizontal |
| Ingress Protection | IP65 to EN 60529 |
| Electrical Supply | 220V-254V 50/60Hz
220V-300V dc (non-emergency only) |
| Battery | Internal Ni-Cd battery
6V 4 Ah - 18W
6V 7Ah - 36W |
| Duration | 90 minutes to EN60598-2-22 |
| Emergency Output | 50% of one lamp (18W)
25% of one lamp (36W)
45% HEO Option |
