| Type of Protection | Ex nA (Non-sparking), Dust protected enclosure |
| Area Classification | Zone 2 and Zone 22 areas
|
| ATEX Classification | Group II Category 3 G D |
| ATEX | Type Examination Certificate BAS01ATEX3052X |
| Coding | II 3 G D EEx nA II (refer to datasheet for T rating and Ambient) |
| Enclosure | Marine grade stainless steel body with polycarbonate diffuser and stainless steel retaining clips |
| Reflector/Geartray | White polyester painted zinc coated steel |
| Entry | 3 x 20mm diameter holes,
Two at one end and one at the other end |
| Termination | 3 core 4mm2 max. conductor with looping and through wiring 16A rating |
| Installation | Two clearance holes for M8 fasteners located on rear of body, sealing washers provided |
| Lampholder | G13 (Bi-pin) |
| Lamp Type | T8 tubular fluorescent |
| Control Gear | High Frequency ballast housed within sealed enclosure |
| Relamping | Access via front diffuser secured by quick release stainless steel clips |
| Burning Position | Universal |
| Ingress Protection | IP65 to EN 60529 |
| Electrical Supply | 220-240V 50/60Hz |
