| Type of Protection | Ex nA (Non-sparking), Dust protected enclosure
II T4 or 150ºC*
-20ºC < Ta < +55ºC
* - see certificate |
| Area Classification | Zone 2 and Zone 22 areas |
| ATEX Classification | Group II Category 3 G D |
| IEC Ex | IECEx ITS 03.0003 |
| ATEX | Type Examination Certificate BAS01ATEX3276 |
| Enclosure | GRP body with polycarbonate cover and brass suspension points |
| Reflector/Geartray | White polyester painted zinc coated steel |
| Entry | 4 x M20 cable entries, two at each end |
| Termination | 3 core 6mm2 max. conductor with looping and 16A rating through wiring (4 core on emergency) |
| Installation | Two M8 tapped brass inserts located on rear of body. (thread depth 12mm) |
| Lampholder | G13 (Bi-pin) |
| Lamp Type | T8 tubular fluorescent |
| Control Gear | High Frequency ballast housed within sealed enclosure, Emergency - electronic charger/inverter housed in sealed enclosure |
| Relamping | Quick release diffuser clamp and hinged cover |
| Burning Position | Universal |
| Ingress Protection | IP66/67 to EN 60529 |
| Electrical Supply | 220-240V 50/60Hz |
| Battery | Ni-Cd battery (6V 4Ah) |
| Duration | 3 hours |
| Emergency Output | 10% of one lamp |
